

Pricing below is for labor only. Parts and fluids priced separately.
Run engine to temp. Drain engine oil, change oil filter, refill with new oil. Run and check for leaks. Price $99.95
Run engine to bring outdrive oil to temp, drain and re-fill outdrive oil, vacuum/press test, remove outdrive, inspect u-joints and bellows, inspect shift cavity, inspect propeller and grease shaft. Inspect and grease gimble bearing, inspect anodes, check engine alignment, re-install outdrive, run and verify shift. Price $159.95
Run engine to bring gear lube to temp., drain and re-fill outdrive, vav/press test, remove outdrive, inspect bellows and u-joints, shift cavity, inspect and grease gimble bearing, check engine alignment, grease prop shaft. Inspect zinc anodes, re-install O/D. Run and verify shift. Price $196.95
Run engine to bring outdrive oil to temp, drain and re-fill outdrive oil, vacuum/press test, remove outdrive, inspect u-joints and bellows, inspect shift cavity, inspect propeller and grease shaft, inspect and grease gimble bearing, inspect anodes, check engine alignment, re-install O/D. Run and verify shift. Price $249.95
Check starting/charging system, visually inspect wiring, hoses, fuel lines and exhaust hoses, service battery, clean flame arrestor, replace fuel filters, engine anodes (if equipt) replace spark plugs, replace dist, points and condenser (if equipt) replace dist cap and rotor, adjust timing and dwell (if required), adjust carb, verify shifting. Price $196.00
Check starting/charging system, visually inspect wiring, hoses, fuel line, and exhaust hoses. Service battery, clean flame arrestor, replace fuel filters, engine anodes (if equipt) replace spark plugs, replace points and condenser (if required) replace dist. Cap and rotor. Check antifreeze (if FWC), adjust carb, timing & dwell. Check shifting. Price $196.00
Check starting/charging system, visually inspect wiring, hoses, fuel line, and exhaust hoses. Service battery clean flame arrestor, replace fuel filters, engine anodes (if equipt), replace spark plugs, replace points and condenser (if equipt) Replace dist. Cap & rotor. Check antifreeze (if FWC), adjust carb, timing & dwell (if required) verify shift operation. Price $245.95
Check engine starting and charging system, check compression, check spark, replace spark plugs, change all fuel filters, change lower unit lube, grease all zerk fittings, check and adjust timing and carb, replace anodes if needed and verify shift.
Above checks plus change engine oil and filter:
All above prices are for labor only. Parts and fluids are priced separately.